MEDIAN 175W X-Band GaAs BUC (Standard M&C)
MEDIAN 175W X-Band GaAs BUC (Standard M&C)
MEDIAN 175W X-Band GaAs BUC (Standard M&C)
MEDIAN 175W X-Band GaAs BUC (Standard M&C)

MEDIBX175A-XN-S

MEDIAN 175W X-Band GaAs BUC (Standard M&C)

MEDIBX175 Series

$55,676.11
/
Quantity Available: 0
Next Availability: Not Applicable
Next Availability Lead Time: Contact Sales
Ex Works: Richmond, BC, Canada

View Resellers Quantity

(Scroll to see specifications and documents)

0 en stock



For the X-Band Median BUC, a receive reject filter must be purchased as an add-on accessory unless: 1) you are using a Tx-only antenna and do not require the receive function; or 2) your terminal already includes embedded filters. The receive reject filter is sold separately at an additional cost.

KEY SPECIFICATIONS
band X-Band
external ref freq 10 MHz -12 to +5 dBm
frequency sense Non-Inverting
input frequency band 1 950 - 1450 MHz
of onboard los Single Band
output frequency band 1 7.900 - 8.400 GHz
output power rated 175W
product family MEDIAN
reference type External
RF SPECIFICATIONS
AM-PM conversion 3.0 deg/dB @ Rated Power
attenuator range 30 dB Variable in 0.1 dB Steps
gain flatness (1MHz) 0.25 dB p-p max
gain flatness (36MHz) 1.5 dB p-p max
gain flatness (over full band) 4 dB p-p max
gain variation over temperature (open loop) 3 dB p-p max
gain variation over temperature (witg AGC) 1 dB p-p max
gain version Std (X-Band) unit with Multicarrier compatibility only
group delay linear 0.03 ns/MHz
group delay parabolic 0.003 ns/MHz178
group delay ripple 1 ns p-p Over Any 36 MHz
harmonics -60 dBc max
IMD3 -27 dBc max
input impedance 50 Ohm
input power detector range -55 to -20 dBm
input VSWR 1.5 : 1
Level Stability with ALC ± 0.5 dB
mute -70 dBc Max.
output noise power density Rx 165 dBm/Hz (with RX Reject Filter)
output noise power density Tx 75 dBm/Hz
output P1dB +52.4 dBm min
output Plin 46.8 dBm
output spurious in band 65 dBc
output spurious out of band Complies with MIL-STD 188-164C
output VSWR 1.5 : 1 max
phase noise 100Hz offset max -140 dBc/Hz
phase noise 10Hz offset max -115 dBC/Hz
phase noise 10kHz offset max -155 dBc/Hz
phase noise 1kHz offset max -150 dBc/Hz
small signal gain 83 dB min
ELECTRICAL SPECIFICATIONS
current consumption 1300 VA
output power detector range Rated Power to -20 dB
power reading accuracy ± 1.0 dB max
power requirements 200-240V AC
power supply AC Powered
INTERFACE SPECIFICATIONS
IF connector N
M and C option Standard M&C
output connector CPR-112G
ENVIRONMENTAL SPECIFICATIONS
altitude 10,000 ft (3,000 m) ASL
humidity 100% Condensing
temperature operational -40°C to +55°C
PHYSICAL SPECIFICATIONS
product dimensions (LxWxH) 412 x 254 x 188 mm
product weight 14.9 kg
Volver a Componentes de satélite