MEDIAN 80W Ka Single Band GaN BUC (AC + INT Ref Standard Stability + Standard M&C)
MEDIAN 80W Ka Single Band GaN BUC (AC + INT Ref Standard Stability + Standard M&C)
MEDIAN 80W Ka Single Band GaN BUC (AC + INT Ref Standard Stability + Standard M&C)
MEDIAN 80W Ka Single Band GaN BUC (AC + INT Ref Standard Stability + Standard M&C)

MDKA080ANIG-CN-SW

MEDIAN 80W Ka Single Band GaN BUC (AC + INT Ref Standard Stability + Standard M&C)

MEDIBKA080 Series

$110,008.89
/
Quantity Available: 0
Next Availability: Not Applicable
Next Availability Lead Time: Contact Sales
Ex Works: Richmond, BC, Canada

View Resellers Quantity

(Scroll to see specifications and documents)

0 en stock



KEY SPECIFICATIONS
band Ka-Band
input frequency band 1 1.0 - 2.0 GHz
number of onboard LOs Single-Band
output frequency band 1 29.0 - 30.0 GHz
output power rated 80W
reference type Internal Standard Stability
Product Revision A
RF SPECIFICATIONS
AM-PM conversion < 2 Deg/dB @ Plin
attenuator range 30 dB variable in 0.1 dB steps
gain flatness (36MHz) 1.5 dB p-p max
gain flatness (over full band) 4 dB p-p max
gain variation over temperature (open loop) 4 dB p-p max
gain variation over temperature (witg AGC) 1 dB p-p max
gain version WGS Compatibility Option
input impedance 50 Ohm
input power detector range -35 to 0 dBm
input VSWR 1.5 : 1
Level Stability with ALC ± 0.5 dB
output noise power density Tx < -73 dBm/Hz
output Plin +46 dBm
output Psat +49 dBm
output spurious in band -60 dBc
output spurious out of band -60 dBc; Complies with: - ETSI EN 301 360 - ETSI EN 301 459 - MIL-STD 188-164C
output VSWR 1.3 : 1 max
phase noise 100Hz offset max -68 dBc/Hz
phase noise 100kHz offset max -92 dBc/Hz
phase noise 10Hz offset max -43 dBc/Hz
phase noise 10kHz offset max -83 dBc/Hz
phase noise 1kHz offset max -78 dBc/Hz
phase noise 1MHz offset max -102 dBc/Hz
small signal gain 79 dB min
ELECTRICAL SPECIFICATIONS
current consumption Plin 450 VA
current consumption Psat 575 VA
output power detector range Rated power to -20 dB
power reading accuracy ± 1.0 dB max.
power requirements 100 to 240 VAC
power supply AC Powered
INTERFACE SPECIFICATIONS
IF connector N
M and C option Std M&C Option
output interface WR28 UG Cover with Groove
ENVIRONMENTAL SPECIFICATIONS
altitude 10,000 ft (3,000 m) ASL
humidity 100% Condensing
IP rating IP 65+
temperature operational -40°C to +55°C
PHYSICAL SPECIFICATIONS
product dimensions (LxWxH) 310 x 183 x 173 mm
product weight 8.8 kg